TC – 1 – HOT ROLLED ROUND TUBING – ASTM A513 TYPE 1
Diameter Tolerances (Inches)
NOTE: Measurements for diameter are to be taken at least 2 inches (a) from the ends of the tubes
Outside Diameter In. Range. (a)Wall ThicknessFlash-in Tubing (b,c)
Flash Controlled to 0.010in. max Tubing (c,e)Flash controlled to 0.005 in. max Tubing (d,e)
Bwgfin.aOutside Diameter Plus and MinusOutside Diameter Plus and MinusOutside Diameter Plus and MinusOutside Diameter Plus and Minus
Tolerances, In.a,g
3/4 to 1-1/8, incl16 to 10
0.065 to 0.134
0.0035
0.0035
0.0035
0.0200
↑ Top of Page